Marabu a-system spray is a premium spray paint of the next generation. It is based on innovative technological developments: the new Aqua formula and a can specially developed for this paint technology produce unique results – with minimal odours, short drying times and very easy processing on almost all surfaces.
Besides, minimal odours, short drying times and very easy processing on almost all surfaces makes them very appreciated by artists.
The Marabu a-system spray contain first-class pigments, giving them high colour brilliance and excellent light fastness. Also, high coverage, good stability and extremely smooth paint application makes them easy to used and offer multiple possibilities to artists.
The Marabu a-system spray offers the finest atomization of the paint particles.
- Extremely fast drying
- Rapid recoatability
- Simple processing
- Fist-class pigments
- High colour brilliance
- High coverage
- Good stability
- Excellent light fastness
- Finest atomisation of the paint particles
- Excellent colour transition
- Extremely smooth paint application
- Reduced cracking
- Suitable for use on almost all surfaces
- For indoor and outdoor use
Instructions for use:
All surfaces must be clean, dry and free from rust and grease. Sand surfaces beforehand if necessary. Wood: dry sand with grain size P 240. Metal: Dry sand with grain size P 400-P600, apply a primer to ferrous metals.
Shake the can until you can hear the mixing ball. Then shake thoroughly for a further 2 minutes. Briefly spray the can and perform a test spray before the first application.
Always hold the Marabu a-system spray can in a vertical position.
Spray on a thin undercoat and apply several opaque spray coats after 3 – 5 minutes. Observe a drying time of 3 – 5 min. between 2 spray coats. A spray coat corresponds to a dry film thickness of approx. 30 µm.
Approx. 10 -25 cm
The following information refers to a dry film thickness of approx. 60 µm (2 spray coats), a temperature of 20°C and relative humidity of 50%. Dust-dry: drying level 1 according to DIN 53150 20 min. Touch-dry: drying level 3 according to DIN 53150 70 min.
As with all water-based paints, the drying times of the Marabu a-system spray are also heavily dependent on the ambient temperature and relative humidity in particular. Low relative humidity leads to shorter drying times and high humidity leads to longer drying times.
The paints can be recoated at any time with the same product.
After finishing the work:
Turn the can around and spray the valve until it is empty after finishing the painting process. Wipe the spray head with a damp cloth to avoid the paint drying on the spray head.